NLC - Tile-In with Carbide Insert

These nosings are suited to all applications both domestic and commercial where there is use of Ceramic Tiles, wood or laminate on a stair case.

The silicone carbide insert combines durablity with performance, suitable for internal and external applications
Product
Depth 10 & 12.5mm
Length (m) 2.6
Box Qty 10
Title  
NLC Datasheet NLC Datasheet
Nosing user guide Nosing user guide


When installing with Tile Adhesive this should offer adequate fixing, however, if required most tile in nosings offer a mechanic fixing method using 5mm holes within the flange making them suitable for Wood and Laminate floors that do not require Tile adhesive. 


  1. Check the fit of the nosing and ensure the profile is the correct height and width for the step and floor covering. 
  2. Install the floor covering on the riser. 
  3. Place the nosing firmly on the step and if necessary mark the floor. 
  4. Drill and Plug the floor if Mechanically fixing. 
  5. Apply the adhesive using a suitable notched trowel to the manufacturers recommendations. 
  6. Bed the profile into the adhesive ensuring that the adhesive comes through all the flange holes, spread the adhesive over the top of the flange before installing tiles. 
  7. A grout gap is not required however if visible ensure that grout is compressed firmly within the gap.